Brand：C
Other Data：
ML-C is an automatic hot mounting press designed specifically for metallographic specimen preparation. It features easy maintenance, intuitive operation, and a memory module. This hot mounting press can complete pressurization, heating, and cooling operations fully automatically. Once relevant parameters are input, users can initiate the machine with a single button press, significantly reducing the preparation time for embedded samples. This enhances the efficiency and convenience of subsequent grinding, polishing, and metallographic inspection and analysis.
The intuitive operation allows users to quickly familiarize themselves with the hot mounting press without the need for complicated learning processes, enabling them to swiftly carry out metallographic specimen preparation tasks. Moreover, the hot press machine is equipped with a memory module that can record and store commonly used parameter settings. This enables users to quickly recall them during the next metallographic preparation, saving time on parameter configuration.
Features
Intuitive User Interface
The intuitive control panel allows operators to easily set up heating temperature, heating time, and cooling time.
Easy Maintenance
The cover design supports to maintain the machine more easy and convenient.
The Screw Thread Fixture
Enhanced strength provides a robust construction.
Memory Modes
40 sets of parameters which can be easily accessed and stored.
Special Motor
Effective silent motor makes the noise below 52 decibels, particularly suitable for laboratory and low decibel required place.
| Model | ML25C, ML25.4C, ML30C, ML31.75C, ML32C | ML38.1C, ML40C, ML50C |
| Sample Quantity | 1~2 pcs/per time (optional spacer for 2pcs) | |
| Spacer (Optional) | Ø25 (ML25H0219A) Ø30 (ML30H0219A) Ø32 (ML32H0219A) Ø25.4 (ML25.4H0219A) Ø31.75 (ML31.75H0219A) |
Ø38.1(ML38.1H0219A) Ø40 (ML40H0219A) Ø50 (ML50H0219A) |
| Temperature (°C) | 0 ~ 250 | |
| Heating Power (W) | 1600 | 2400 |
| Total Power (W) | 2200 | 3000 |
| Pressure (kg/cm²) | 80~320 (1137~4551 psi/78~313 bar) (The actual pressure will be affected by the size of the mounting tube and the material of the powder.) |
|
| Heating Time (s) | Max. 3600 (60 mins) | |
| Cooling Time (s) | Max. 1800 (30 mins) | |
| Memory Mode (set) | 40 (Heating temperature, heating time, and cooling time ) |
|
| Dimension WxDxH (mm) | 540 × 560 × 625 | |
| Machine Weight (kg) | 70 | 71 |
| Power Supply | AC 220V 1Ø | |
